Electrical Topics - Anything with a wire attached
Articles related to the electrical systems on EVELO Bicycles
There are several likely issues that may be causing this issue with the most likely culprit being the electronic brakes that each EVELO bicycle is equipped ...
Thu, 25 Jul, 2019 at 4:38 PM
The checking / resetting of the speed limiter is pretty easy...This is the sequence:
Power up the system by pressing MODE for a few seconds...
Thu, 20 Oct, 2016 at 11:40 AM
Calibrating the Automatic N380 Shifting System: 1. Turn system power on 2. Pedal the bicycle lightly through the entire calibration procedure - have...
Fri, 10 Jul, 2020 at 1:48 PM
Heres a link for instructions on how to update the firmware on your NuVinci / Enviolo Automatic Shifting System - the instructions and files are also inc...
Thu, 9 Jul, 2020 at 6:38 PM
The gauge on your display that shows the battery level can vary in the short term based on how much current is being drawn by the system. What you are ex...
Tue, 13 Jun, 2017 at 3:57 PM
If your battery does not latch into place properly, we recommend pushing downward on the battery itself after you swing the battery in from the side. Yo...
Wed, 17 Jun, 2020 at 4:52 PM
To replace the taillight batteries, first grasp the tab shown below and pull down on it towards the rear of the bike to remove the taillight cover. ...
Wed, 15 Nov, 2017 at 4:17 PM
I wanted to let you know that the 20 mph maximum speed on your bike is a result of Federal Law regarding electric bicycles. By law, any electric bike that...
Fri, 10 Jul, 2020 at 1:30 PM
The Harmony system has received a firmware update that great enhances the performance of the system. ("Firmware" is the computer program that r...
Thu, 9 Jul, 2020 at 6:38 PM
The best way to truly assess reduced range is to ride the battery from a full charge until it's completely flat. Please do the following: Use...
Wed, 1 Jul, 2020 at 3:35 PM