When your Automatiq shifting system needs a firmware update, the 'i' symbol next to the 'Update Firmware' button will be darkened.
If you click on the 'i' button, you will get the following message:
Clicking on the 'Update Fimware' button will bring up the following prompt:
Click on 'Update' and you will see the progress status of the data transfer.
Once the new firmware is uploaded, the Automatiq Hub Interface will need to reboot.
Once the AHI has rebooted, you should see the following message:
If you select the 'Info' tab at the bottom of the screen, you can see your current firmware version.