For anyone who is new to the Automatiq system, it helps to start with this video:
You can find the Quick Start Guide for your bike here:
If you're on Android, you can find the Enviolo app for your phone here: https://play.google.com/store/apps/details?id=com.enviolo&hl=en_US&gl=US
The Apple version can be found here: https://apps.apple.com/us/app/enviolo-automatiq/id1451614500
Pairing instructions for the app can be found here: https://support.evelo.com/a/solutions/articles/252432
For the CLiQ Pure Controller, The center button is used for pairing the device. The up and down arrows are used to decrease and increase cadence respectively. We do however recommend installing the app and updating the firmware first. While not a requirement, firmware updates are recommended to offer the best shifting performance.
In the event that you need to pair the CLiQ Pure controller to the hub, the Instructions are here:
https://support.evelo.com/support/solutions/articles/254702-automatiq-pairing-co-controller
- If you install the enviolo CLiQ Pure on the left side, press and hold the upper and middle buttons for ~2 seconds, until the the Status LED turns green for 2 seconds. The controller will then be set to the left side of the handlebar.
- If you install the enviolo CLiQ Pure on the right side, press and hold the upper and middle buttons for ~2 seconds, until the the Status LED turns red for 2 seconds. The controller will then be set to the right side of the handlebar.
Here is Enviolo's quick start video for the CLiQ Pure Controller. https://www.youtube.com/watch?v=0rGoJTxLPKg