Getting the correct combination of cog, ring, and belt that works with your bike relies on precise tolerances, and the margin of error is so low that we can't promise you anything will work other than what came on your bike, but we are happy to try.
We cannot give you an accurate answer without measurements from your bike. Even within each production run, there is some variance from frame to frame. Before you buy anything, we need an accurate measurement of your chainstay length, in millimeters. Simply measure from the center of the crank bolt to the center of the rear axle.
Share that measurement with us, along with an estimate of how far you can adjust the dropout in each direction, and we are happy to advise which combination of parts might work. With that said, we do not make any guarantees on this unless we do the install ourselves. If you buy the parts from us, we will happily accept returns for 'as new' parts, though shipping fees are nonrefundable.